$47.69 - $61.99
- SKS B65 Commuter II Fender Set for 28 - Famous Bluemel Full-Coverage Fender Set - Features stainless hardware and stainless 3.0mm stays - Front profile 680mm - Rear profile 1185mm - ASR security release system for the front wheel
Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 27.5- or 29-inch wheeled bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.
Topeak's DeFender M1/M2 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.
Planet Bike's Bog Suspension Fork Front Fender keeps rain and mud at bay while you play. It's made of a super-durable, all-weather polymer and mounts easily to most suspension forks. And, with the wide profile, you've got extra coverage.
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.
Topeak's DeFender M2 rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release attachment fits most seatposts and allows the DeFender to be installed and removed in seconds. Plus, the 2-pivot arm is super adjustable for better coverage and a perfect fit on any bike.
Protect your precious road rocket from wet roads and bad weather with Topeak's DeFender RC1/RC11 fender set. They utilize a unique quick-release mounting system that makes installation a snap and they're made from tough, yet light polycarbonate with stainless steel struts for stiffness and durability. The front fender has a clever feature: it automatically disengages if a large object enters the wheel. The underside is highly polished so grime doesn't stick and, they accommodate tires up to 700 x 25c in size.
$17.99 - $23.99
- Lightest and most versatile MTB mudguard available - Uses hook and loop Velcro straps to attach to the bridge and lower legs - Compatible with forward and double bridge fork designs and all wheel sizes - XL version is longer and provides more coverage - Reverse version is designed for forks with reversed bridges - Fat Face, you guessed it, extra wide for Fatbike applications
- Compatible with Hardcore fenders - 700c x 35mm - Contains 35mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
A sturdy, secure and highly visible set of full-coverage fenders designed to fit more bikes than any other full-coverage fender. Easy to install and easy to adjust, Rainrunners are a perfect way to install fenders on bikes that are not designed to accept fenders. These fenders are easily mountable with either O-rings or the included zip ties, and are compatible with most disc brake-equipped bikes. Weight 575 g / 1.26 lbs (pair) Mounting system - Below: Mount on frame or fork via included Frame-Runners - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Construction - Alloy/Engineering plastic FRAME-RUNNER mounts - 360 degree visibility 3M Reflex sides - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Added Benefit - Included FRAME-RUNNERS mount to almost any frame or fork to ‘create’ eyelets - FRAME-RUNNERS can be installed and removed easily via included O-rings, or permanently mounted using included zip-ties - 3M Reflex side panels offer 360 degrees of reflective visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Extended mudflaps keep feet dry and reduce rear spray - Sold pre-assembled for quick mounting - Compatible with most disc-brake-equipped bikes
The Grunge front fender was made for your messiest dirt adventures. It's super durable and provides exceptional coverage from mud, crud and spray. Its 3.4-inch wide profile and innovative steer tube mounting system will work on most suspension and rigid forks. - Durable all-weather polypropylene blade - Mounts to most suspension and rigid forks - Includes hardware to fit small, standard and oversized tapered steerer tubes (18.5-34.5mm ID) - Eyelets Required?: No - Wheel size: 26", 650b, 29" and 700c - Dimensions: 85mm wide x 600mm long - Max tire width: 2.1" - Weight: 160 grams
•Steel •Chrome Plated •Front or Rear •Cruiser •26-inch x 75mm
Lightweight, removable fender intended for MTB use - Adjustable rubber straps make installation quick and easy - 100 percent recyclable polypropylene
Keep water and mud at bay with SKS's Dashboard fender! It's light and easy to install and remove. Plus, it works with most rigid and suspension forks.
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
Keep your feet and backside dry with SKS's Longboard fenders! They provide full coverage to keep you clean on even the wettest rides.
- Heavy duty composite construction - Adjustable to fit 20" to 28" wheels - Clamp on rear fits 24.4-32mm seat tubes - Front is brake caliper hole mounted - Set Unit: Pair
The Topeak DeFender TX is a compact trekking bike fender set. Adjustable aluminum struts with QR levers for quick, perfect alignment and good tire coverage. The DeFender TX set is made of high impact plastic and the highly polished underside prevents dirt buildup. Fits tires up to 700 x 44c. - Brake bolt and fork eyelets attachment (front) Seat tube and seatstay or chainstay eyelets attachment - Injected high impact resistant plastic with aluminum struts - Adjustable angle and position for perfect tire coverage - 56.8 x 13.7 x 8.4 cm /22.4” x 5.4” x 3.3” (Front); 77. 8 x 26. 5 x 8.6 cm /30.6” x 10.4” x 3.4” (Rear) - Weight: 192 grams (Front); 245 grams (Rear)
- Made of resistant chromoplastic - Stainless steel bracket and stays - Pre-assembled for fast and easy installation - Extra long mudflaps provide ultimate coverage
Fat Bike Mud Guard Fat bikes are inherently meant for extreme conditions, where water, mud and grit are no strangers. It mounts easily with reusable hook-and-loop straps, so you can attach it to nearly any mountain bike fork without any worries. - Built From Number 5 Recyclable Polypropylene - 1.2mm Thickness
Turn your bike into an all-weather vehicle with Planet Bike's Cascadia ALX Fenders. Made of unbreakable corrosion-resistant 6061 aluminum with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection plus release tabs on the front fender for easy on/off. The hardware's even pre-installed for quick mounting.
Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders will provide years of use. With their pre-installed mounting hardware you can install and remove them in seconds.
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube - Two tone injected high impact resistant plastic - Weight: 233 grams - Rear angle adjustable - 73x21x11cm/28.7x8.3x4.3-inch
Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use. - Length: 370 mm (14.5") - Weight: 60 g (2.1 oz)
$29.99 - $33.99
Front Fender: • Front fender made of durable all-weather polymer • Mounts to most suspension and rigid forks • Fits oversized tapered steer tubes along with small and standard sizes. (18.5-34.5mm ID) • Extra-wide profile for 3-5" wide tires Rear Fender: • Minimalist seat post fender made of durable all-weather polymer material • Quick-release mount snaps on and off in seconds • Wide profile design • Features an adjustable fender angle to fit most bikes • Extra wide profile to fit 3-5" tires
$46.99 - $52.99
If you ride bent, Planet Bike's recumbent fenders keep you covered when Mother Nature rains on your ride. They are designed for non-tradtional bike and trike setups. Their clean lines and rugged aluminum construction provide great protection from rain, road grit, and other tire spray. - 6061 aluminum blades - Stainless steel V-stays and hardware are pre-installed and disc brake compatible - 100mm mudflaps for extended coverage - Release Tabs on front fender for added safety - Eyelets Required?: Yes - Wheel size: 20” - Max tire size: 20" x 1.5" (50mm) / 20" x 1.9" (60mm)
If you ride bent, Planet Bike's recumbent fenders keep you covered when Mother Nature rains on your ride. They are designed for non-tradtional bike and trike setups. Their clean lines and rugged aluminum construction provide great protection from rain, road grit, and other tire spray. - 6061 aluminum blades - 150mm mudflaps for extra coverage - Adjustable stainless steel stays create a secure fit on any style recumbent - Eyelets Required?: Yes - Release Tabs on front fender for added safety - Wheel size: 16” - Fender width: 50mm - Max tire size: 16" x 1.5" - Weight: 210 grams
These steel fenders offer tire coverage that is durable with a timeless aesthetic. - The crescent full-coverage design offers a closer fit around the tire - Made in the USA
Page 1 of 5 Next page