The water-resistant Light Kit features a clip mount to install on your Burley trailer's light loop or bracket. The 5-LEDs shine bright with 4 modes (flashing, constant, chasing & random) to provide increased visibility day or night. - 5-LEDs - 4 modes (flashing, constant, chasing & random) - Includes: (1) Red Light & (2) AAA Batteries - Compatible with Burley trailers using a Light Bracket or Light Loop
Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)
Vya Smart Lights are a revolutionary concept incorporating technology to provide effortless safety in an ultra-compact, convenient design. Auto-on sensors, waterproof bio-renewable construction, and innovative safety features create the most technically advanced light available for cyclists. The Vya Commuter Combo is the perfect solution for riders that pedal in high traffic areas and want the added assurance of SafePulse visibility day and night. Features - 150 Lumen Headlight & 50 Lumen Taillight with variable SafePulse beam pattern optimized for maximum visibility day and night - Smart sensor technology senses motion and automatically turns lights on when inserted into mount; Auto-off when bike is parked removed from mount - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Beam patterns optimized to give a wide swath of light that can be seen clearly from the rear and side ideal for city riding - Extra long run-time perfect for riders who do not want to charge lights on a daily basis, Low battery status is indicated by rapidly flashing sidelights - USB Mount Receptor allows lights to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; lights will not turn on when removed from mount and slipped into a pocket or bag - Easy direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Headlight Specifications - Lumens: 50 (high), 50 (SafePulse) - Runtime: 480 min (high), 480 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min
Bike safety reinvented, Vya Pro Smart Lights provide an uncompromising powerful SafePulse beam with convenience commuters love. Smart auto-on/off sensors are a true game changer – start riding and the light turns on automatically and will shut itself off after the ride, with a delay built in to remain on at stoplights. Whereas Vya taillights will always pulse for effective rear visibility, the smart headlight senses ambient light and knows to pulse in the daytime but remain steady at night – automatically adjusting to the safest riding mode possible. Attaching Vya is effortless with a simple clockwise 1/4 turn into the mount locking the light in place and activating the auto-on feature. When it comes time to recharge, remove Vya from the mount in seconds and insert the integrated USB paddle directly into a computer or USB power outlet – no cables keeps recharging simple and efficient. For the busy commuter that wants premium visibility but a lighting setup that removes in seconds, the smart Vya Pro Commuter Combo is the perfect solution. Features - 200 Lumen Headlight (250 SafePulse) & 100 Lumen Taillight optimized for maximum visibility day and night - Smart sensor technology senses motion and automatically turns lights on when inserted into mount; Auto-off when bike is parked removed from mount - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Powerful custom optics to provide a punchy beam visible over 2KM in daylight - USB Mount Receptor allows lights to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; lights will not turn on when removed from mount and slipped into a pocket or bag - Easy direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Headlight Specifications - Lumens: 200 (high), 250 (SafePulse) - Runtime: 120 min (high), 360 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min
Planet Bike's Beamer 1 & Blinky 3 Light Set will keep you safe when it's dark. For excellent visibility the Beamer headlight provides a focused LED beam and the Blinky taillight boasts 3 red LEDs. There are also quick-release mounts for easy on/off.
Topeak's RedLite II mounts on seatposts, seat bags and seatstays. Its 4 super-bright LEDs shine through a 220-degree, wide-angle, reflective lens to alert traffic approaching from almost anywhere. The RedLite's watch-style lithium batteries (included) offer up to 100 hours of run time. Plus, you can choose from constant or blinking mode.
Topeak's HeadLux helmet light is the Siamese twin of bike lights. This one light does double duty with two super-bright LEDs facing forward and two red LEDs facing the rear. Its 3 modes and wrap around lenses ensure you'll be seen. A nice supplement to your regular light set, the HeadLux is a convenient way to add extra safety to your commute. Plus, batteries are included.
Planet Bike's Superflash/Blaze Combo Light Set is a commuter's dream that maximizes your visibility on dark, moonless nights. The Blaze boasts a Nichia half-watt white LED with a brilliant beam specifically designed not only to be seen, but also to let you see where you're going. The Super Flash aims 2 LEDs plus a half-watt Blaze LED for light that can be seen for up to 1 mile! They both feature flashing and steady modes, include batteries and deliver run times of up to 100 hours.
An impressively bright dual-LED cycling light with a rugged machined aluminum body. Integrated cooling fins optimize performance and side cutouts provide side visibility. With up to 600 lumens of output and nine output modes, featuring a Daytime Flash mode, the Micro Drive 600XL is super-versatile—day or night. It offers up to 44 hours of battery runtime (nine hour increase) and charging is easy with an integrated cable-free USB stick. Its strap mounts securely to most bar sizes and shapes. Specs - Max Lumens: 600 - Weight: 97g - Max Runtime: 44 hours - Recharge Time: 2:30 hours
The NiteRider Swift 500 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it’s USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 500 packs a big punch with a maximum light output of 500 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 500 can run for up to twenty-five hours before it needs a charge. The NiteRider Sabre 80 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye catching visibility in both day and night. With the addition of amber colored side lights, the Sabre 80 provides 180 degrees of protection. SWIFT 500 - Highly durable design made with fiberglass reinforced plastic - Smooth 500 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable SABRE 80 - Daylight Visible Flash (DVF) - 80 lumen super bright tail light - Easy on and off seat post strap mount with quick release tab - Amber side lights for 180 degrees of visibility - Convenient USB rechargeable - Be Seen by cars = Be Safe - FL1 Standard IP64, water resistant WARRANTY The Swift 500 Boost and Sabre 80 are both backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES SWIFT 500 - LED Head Light - Internal Li-Ion Battery - Built-in, Handlebar Mount - USB Charging Cable SABRE 80 - LED Tail Light - Seatpost Mount - USB Cable
See and be seen with CatEye's HL-EL135 Headlight. This compact light uses 3 super-bright LEDs for a wide beam that lets you see more of the road. With 2 AA batteries, it provides up to 80 hours of run time on steady mode and up to 320 hours on flash mode. Plus, the no-tools universal mount makes installation fast and easy.
Planet Bike's Spok Taillight ensures you'll be seen for up to a mile! It boasts a super-bright LED and a translucent casing that allows 220 degrees of visibility. The rubber strap can be used to mount the Spok on seatposts or odd shaped tubes of all sorts and sizes. And, this little baby runs up to 100 hours with the included CR 2032 battery. There's even a keychain hole for portability!
Cage mounted amber side light Be seen from the side when you’re on the go with the Bottle Blinky. It mounts discreetly under your waterbottle cage but provides dynamic side visibility in three flavors: steady, Courtesy pulse and Superflash. - 6 high output surface mounted amber LEDs provide steady, Courtesy & Superflash modes - FL1 Tested - Run times: 24 hrs (steady – 7 lm), 27 hrs (Courtesy – 3-7 lm) and 106 hrs (Superflash – 7 lm) - Amber side lights provide 150° of side visibility on each flank - Highly visible, even in daylight - Dust & water resistance rated to IP64 standard - 2 AAA batteries (included) - Mounts to water bottle mounts on downtubes and seat tubes - 58 grams
Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.
The Blinky Safety Light Set features a white headlight and a red taillight, both with super bright LEDs for top-notch visibility and safety. They also have flashing and steady modes providing 220 degrees of light that can be seen from up to 1 mile. Plus, these small flashers are weatherproof, light and durable. The included batteries deliver 100 hours of run time. And, handlebar, seatpost and seatstay mounts are included so they're super easy to put on your bike.
Lock and light in one. Compact, lightweight, wearable cable lock with a 10-lumen rear light integrated into its toughened-nylon case. Features Hiplok’s CLIP + RIDE, the FLX system clips on to bag straps and jersey pockets for easy carry. As a light and lock in one, FLX is ideal for rides when you can only take the essentials.
With powerful output and premium safety features, the cost-effective Vis 700 is the perfect match for road and urban cyclists. High visibility is paramount and the platform has dedicated amber sidelights that are distinct and easily recognizable by drivers, especially through intersections. City riders will appreciate the exclusive SafePulse beam, scientifically designed to provide the highest level of rider awareness without the risks associated with flashing lights. Easily mount on standard or oversize handlebars with a mount that provides enhanced grip and features quick release technology to remove in seconds. Reliable construction is unmatched in the market and exceeds the needs of daily riders. This is the only waterproof lighting platform with a certified IP67 rating—meaning the light is certified to withstand water immersion up to a depth of 1 meter. Commute with the added assurance knowing rain or shine the light will keep performing. Recharging is fast and efficient with the included Micro USB cable. Revolutionary safety innovations and power to out-shine standard rechargeable lights—Urban 700 is a great solution for riders that want premium quality at a lower price point. Key features - 700 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Visibility is enhanced with bright amber side lighting providing maximum safety through intersections and high-traffic areas - Daylight visible pulse mode keeps cyclist safe without the inherent dangers of flashing lights - Micro-peened reflector optimizes the beam pattern for road riders providing a smooth, even spot beam void of distracting hard edges - Multiple power settings include a one-touch High/Medium toggle to efficiently decrease intensity when full power is not needed - Multi-color battery indicator is driven by custom firmware to provide accurate battery status throughout entire runtime - Mounting is simple and effective with ultra-grippy rubber ensuring light doesn't slip on regular or oversize handlebars - Quick release allows the removal of the light in seconds while leaving the base mount on the handlebar - Waterproof design eliminates the leading cause of bike light failure - water immersion - Charging is reliable and simple with included Micro USB cable Tech Specs - Lumens: 700 (high), 350 (medium), 175 (low), 175 (pulse) - Runtime (minutes): 90 (high), 180 (medium), 360 (low), 720 (pulse) - Beam Angle: 20° (Spot) - Charge Time: 300 min - Fast Charge: No - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter(s) - Impact Resistance (FL-1): 1 meter - Product Weight: 121 grams - Product Dimensions: 1.2" x 1.2" x 4" - Compatible Mounts: Bar, GoPro, Helmet
Convert your Light & Motion Vis 360 (sold separately) into a head mount and use it wherever your non-helmet adventures may lead you. Excels as a running companion and great for bicycle touring as it transforms your Vis 360 into a camping headlamp.
Mount the Nip light to an e-Bike that has the specialty Pro Max stem for accessories.
Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultra-high-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. *Direct X-Lock Mounting System not compatible with all stems. Please see installation manual for stem compatibility. Specs - Max Lumens: 500 - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98"
Topeak's HighLite Combo II is a lightweight set with plenty of power. The WhiteLite II headlight boasts 3 super-bright white LEDs with blinking and steady modes sure to catch the attention of drivers and other riders. And, the RedLite II taillight provides 4 LEDs worth of lighting power with steady and flashing modes. Best of all, neither light requires hardware to mount. Batteries are included.
This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).
Take your Light & Motion headlight off your handlebars and along with you wherever the path may lead. Soft fabric and full adjustable sizing make for a comfortable fit.
Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.
Put on the high beams for extra visibility even in the dark corners of space. Portland Design Works' Spaceship 5 Headlight boasts 5 bright LEDs which shine through a precision lens for a bright, focused beam. It offers steady and flashing mode and has a run time of over 100 hours. - Five bright white LEDs - Fits 22.0-31.8mm handlebars - Runs on 2 x AA batteries (included) - Up to 100 hours run time - Steady and flashing modes - Includes Mission Control 2.0 mount - Weatherproof exterior for all season riding - Weight: 91 grams/3.2 ounces - Dimensions: 98 x 41 x 35mm
The smallest member of the Rapid family packs a mighty punch. Now with a 25 lumen output. Specifically designed for minimalists, the USB-rechargeable Rapid Mini offers 4 modes of eye-catching illumination. At only 22 grams, whether it's on a seatpost, Fizik saddle, or messenger bag, extra weight and bulk are no longer excuses for not being seen. Small in size but big on safety, the Rapid Mini has all the features of its big brothers Rapid X and X2, including low battery indicator, Battery Auto Save and mode memory. What's Included: - Rapid Mini Rear light, SP-14 attachment bracket, one small and one large attachment band, and a micro USB charging cable
German StVZO optimized lens with approved flood and long-range high and low beam. High performance always-on LED delivers 290 lumens in low beam and 550 lumens in high beam. Durable, heat-dissipating CNC machined aluminum construction with dual LEDs. E-bike compatible 6 – 12v input, 9w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Built-in USB port can charge external accessories. Includes X-Lock stem mount and CNC-machined aluminum fork mount. 130cm power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - 550 lumens - Includes Direct X-Lock and aluminum CNC fork mount - CNC-machined aluminum body - Integrated Remote Switch - Integrated USB accessories charging port - E-bike compatible 6 – 12V input, 8W - 130cm power cable included - IPX7 water resistant
Introducing Nip & Tuck - the next evolution in e-bike safety. Setting the benchmark for an integrated lighting solution, high-powered output is backed by industry-leading compact design. Nip (headlight) illuminates with a 500 lumen even spot beam with versatile low-profile mounting options. Tuck (taillight) blasts a strong red pulse with an innovative under-seat attachment to provide visibility at the highest point on the bike. Both Nip & Tuck feature hi-intensity amber side lighting establishing 360 degrees of protective visibility at intersections and high-traffic areas. Designed to provide peace of mind with safe and effective illumination, Nip & Tuck represents the next level of integrated e-bike lighting. Key features: - 500 lumen headlight and 25 lumen taillight certified to the FL-1 Standard - Engineered for seamless e-bike battery integration - Amber side lighting creates 360 degrees of protective visibility - Pulse mode for high traffic areas/day-time riding - Custom reflectors optimize beam pattern to provide efficient and effective distribution of light - Various low-profile headlight mounting options available - Taillight seat rail clamp with angle adjustment for universal mounting and effective visibility - IP67 Waterproof Rating for all conditions commuting – lights are tested to be fully submersible in 1 meter of water for 30 minutes - Designed and Assembled in California. - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee
Put on the high beams for extra visibility even in the dark corners of space. Portland Design Works' Spaceship Headlight boasts 3 bright LEDs which shine through a precision lens for a bright, focused beam. It offers steady and flashing modes and has a run time of over 100 hours. - Fits 22.0-31.8mm handlebars - Runs on 2 x AA batteries (included) - 100 hours run time - Steady and flashing modes - 91 grams/3.2 ounces - 98 x 41 x 35mm
The Nip fender mount is a clean, simple solution to mount the Nip e-Bike headlight above the wheel. This lower position is great for commuting in foggy/rainy conditions or if you simply want fewer mounts on your handlebar. - Compatible with Nip e-Bike headlights
Page 1 of 9 Next page